Three daybed layouts for the guest room, drawn to scale from your measurements. Each plan has a Nano Banana render taken from your own photos. The renders are AI edits, so treat them as mood, not measurement; the plans are the real geometry.
Room ≈ 136 × 121 in (11'4" × 10'1", est.)Daybed 78 × 41 inW1 door → corner 77 5/16W2 corner → closet 61 5/16W3 closet → window 82 1/2W4 window wall → open door 87 1/16
daybedspider cabinetplug-in sconcewindow / mirrorTV (optional, on high outlet)dashed = door swing, rug
C · Bath wall Recommended
Back rail on W4. Window end 4–5 in off the exterior wall; door end stops 4–5 in short of the fully open door (87 in of wall minus 78 in of bed leaves about 9 in to split).
Render from your photo of W4. Spider cabinet stays where it is now (out of frame, left of the window).
Why
Door still opens fully; the bed is tucked behind the line of the door, so walking in, the room reads open.
Biggest clear floor: about 95 in from the bed to the closet wall.
Faces the high outlet on W2, the natural spot for a small wall TV, and faces the closet.
Spider cabinet doesn't move. Its enclosures stay out of direct window sun.
Hall wall frees up for a luggage rack, which a guest room actually uses.
The window end of the bed sits in front of the left part of the window; the arm may cover the bottom of the glass.
Only about 9 in of slack along W4, so placement is fixed. No room for a nightstand, so the light is a sconce on the W4 outlet.
B · Under the window Window seat
Back rail on W3, left end 4 in off W4, so the window sits behind the left half. Side table at the right end. Spider cabinet moves to the hall-wall corner by W2.
Render from your photo of W3. The AI recentered the window slightly; in the plan, the window is near the left corner.
Tradeoffs
Most "designed" look: a window seat by day, a bed by night.
Room for a real side table and lamp.
Closet keeps about 32 in of clear floor in front.
The spider cabinet has to move; the new corner is first in view from the door.
Sleeping against an exterior wall and window is drafty, and the curtains have to be tied up above the back rail.
You see the end of the bed from the door, not the made side.
A · Hall wall Where it is now
No move. The daybed fills door casing to corner (77 5/16 in of wall for a 78 in bed, so it overlaps the casing by about 3/4 in, as it does today). The window corner gets a reading chair.
Render from your photo of W1. The sconce plugs into the existing high outlet on W2.
Tradeoffs
Zero work. The high outlet on W2 is in the right place for a plug-in reading sconce.
Window and its corner stay open for a chair.
No room at either end for a table. The bed is wedged between the casing and the corner.
The bed is the first thing beside you as you walk in, and the light switches sit right at the bed arm.
The high outlet goes to the sconce, not a TV.
Ruled out: W2 between the corner and the closet is 61 in, too short for a 78 in bed. W3 right of the window has the 82 in, but the bed would block the closet drawers. Floating the bed doesn't work either: a daybed needs a wall at its back, and the room is too small for one in the middle.